Ʈ ų , iBoot ð , ֽϴ. A web-addressable remote power controller 2 Ȯ devices ־ 3 ƿ մϴ. iBoot ݿ reboot , On, Off ־, ֿ Ʈ ͳ ذ ֽϴ.
The iBoot® G2+ flagship version comes with configurable AutoPing and Heartbeat functions, enabling it to automatically monitor your system, take action if it detects and issue, and restore operation quickly. If the network goes down, a USB port on the device enables you to reboot onsite via PC and serial command line.
iBoot® G2+ can also connect to the iBoot-EXP expansion unit for independent control of up to three outlets. The expansion ports can be used as General Purpose I/O (GPIO) to monitor and control additional remote devices. Inputs can be used to monitor alarm contacts, environmental sensors, relays and switch closures, while the outputs can drive relays for process control, security and environmental controls. With iBoot® G2+, you can monitor environmental changes like temperature or humidity, and respond to any changes or issues remotely.
The iBoot® G2 basic version offers all the features of iBoot® G2+ with the exceptoion of port expansion, USB access and the Heartbeat Monitor. For additional models and features, see Models and Pricing Below.
Simple Web browser control makes iBoot-G2 easy to operate from anywhere.
iBoot-G2 Status
iBoot-G2 Status with AutoPing Enabled
TCP/IP Setup
Setup - AutoPing Setup
Dual Password Protected
Separate user and administrator passwords. Deploy iBoots throughout your organization.
IP Addressed, 10/100 Base-T
Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access.
Direct TCP and Software Control
Control iBoot-G2 directly from your software application for the highest degree of power control integration. Simple protocol is freely available. Use iBoot-G2 control program to call power control from any network management system. IPSentry What'sUp Gold, etc.
110/220 VAC Operation
Auto ranging power input. Deploy iBoot-G2 anywhere in the world. iBoot-G2 uses IEC320 Connectors and includes line and extension cords for North America.
12 Amp Switching
Current for most Servers, Routers, Kiosks, etc. 10 Amps at 220 VAC.
iBoot-G2 and iBoot-G2+ A/C Power Version
iBoot-DC DC Power Version
Power
105 - 240 VAC Auto Ranging
5 - 48 VDC Auto Ranging
Power Switching
12 Amps at 105-125 VAC, 10 Amps at 210-240 VAC
5 Amps up to 30 VDC. 2 Amps over 30 VDCPositive Terminal Switched.Negative Switched Available on Special Order
Power Connectors
Power Inlet: IEC 320 C13 Plug.Linecord for North America Included. 16AWGX3C x 6'/2mPower Out: IEC 320 C14 Receptacle. Extension Cord for N. America Included.16AWGX3C x 2'/60cm
Power Inlet: Screw TerminalsPower Outlet: Screw Terminals
Network
10/100base-T, Auto sensing Uplink/Downlink Cat 5 Cable Included 6'/2m long
iBoot-G2+ : USB Mini-B Com Port 9600 8 N 1
Protocols
IP Addressable. DHCP or StaticHTTP Web Server built-in, Port AssignableTelnet Server built-in, Port AssignableDxP Messaging Protocol, Port Assignable Auto-Ping TCP ProtocolHeartbeat Detector ProtocolDownload the protocols
External I/OiBoot-G2+ Only
Two Inputs, Two Outputs, Screw Terminal Connections:
Designator
Name
Description
V+
Power Out
This is +12 VDC power out from the iBoot-G2+Maximum current 100 mA
I
Input
Input for status signals. Dry Contact input or Open Collector.
G
Ground
Signal Ground for Input and Output
O
Output
2N3904 NPN Transistor. 100 mA Maximum
Browser
Form Processing Browser RequiredNetscape 3.0 or IE 3.0 or greater
Security
Dual Password Protected, User and Admin
Physical
H x W x D: 2.0" x 3.2" x 4.2" (60mm x 82mm x 107mm)Operating Temperature 0 to 50 Deg. C
Reliability
MTBF 320,000 HoursOperating Cycles 10,000,000 Mechanical. 100,000 at Maximum Load
Compliance
AC Versions
UL/cUL UL60950 Listed I.T.E File No. E225914CE Directives 89/336/EEC, 92/31/EEC and 93/68/EECRoHS/WEEEFCC Part 15 Class B
÷ο(Netflow) ǥ̻ : | ڵϹȣ : 220-02-59623 ǸžŰȣ 06825ȣ ʱ 27 68 202ȣ | 02- 3486-9646 FAX 02-3486-9792Copyright 2000-2002 ÷ο(Netflow) Co.Ltd All rights reserved.