Programmable I/O device server with 2 serial ports, relay and digital outputs, digital and analog inputs and Dallas 1-wire support., SNMP, Modbus/ TCP and web interfaces via built-in 10/100 Ethernet interface. UL listed. The Barionet 100 is a fully programmable I/O device server that supports standard interfaces such as SNMP, CGI, HTTP, and Modbus/TCP to monitor and control a variety of built-in I/O functions. Four analog inputs, four contact closure inputs, four open collector digital outputs, two relay outputs. a 1-wire interface and two serial ports can all be monitored and controlled via several built-in protocols. In additoin, all I/O functions and interfaces can be controlled and monitored using custom DHTML web pages and BCL (Barix Control Language) applications loaded into the device

Barionet (100)

  Applications

• Facility management system
• Building automation
• Remote control and monitoring of machines
• Data acquisition, storage and transmission in any technical system

  Features - specific for Barionet (100) hardware

• 4 contact closure inputs with programmable pull-up resistor
• 4 analog inputs, 0-5V range, 12 bit resolution, programmable pull-up (can be used as contact closure inputs as well)
• Contact closure inputs also support use as Wiegand reader interface
• 4 open collector (digital) outputs, current limited
• 2 relay outputs, switching up to 240VAC, 5Amp

Common hardware features:

• 10/100 Mbit Ethernet interface
• Two serial ports (RS-232 and RS-485)
• Very low power operation (typically 1.5 watts with no relays activated, 4 watts maximum)
• Wide supply voltage input range: 9 - 30V
• Relay outputs and digital inputs
• Dallas 1-wire interface

Software applications available for the Barionet devices:
The Barionet comes pre-loaded with a web configuration and user interface application for monitoring and control of all on-board I/O functions. In addition, full custom applications can be developed using the built-in BCL interpretter (Barix Control Language, which is very similar to BASIC). A demo application, including source code is also included that provides a useful serial tunnelling function, but also serves as a BCL programming example.

The standard software provides the following functionality:

• Browser-based configuration and I/O monitoring pages built-in
• Support for custom dynamic (DHTML) web pages.
• TCP, UDP, CGI, Modbus/TCP, SNMP protocol support
• All I/O functions can be monitored or controlled via built-in standard protocols or using custom DHTML pages and BCL software (Barix Control Language, which is very similar to BASIC).
• Support for 50 1-wire temperature sensors and a 1-wire Real Time Clock
• Example Serial gateway/tunnel BCL program with source code pre-loaded provides serial „tunnelling” across an IP network, and also serves as a BCL programming example.

Available BCL applications for the Barionet:

• Digital I/O tunnel (forwarding of contact closures over the network)
• Example BCL program for controlling and monitoring Barix Modbus expansion modules (R6, IO12, and X8).
• General alarming/monitoring/reporting application for security, monitoring, and supervision applications
• RTP replicator/rebroadcaster
• home automation master
• weather station interface
• NTP server
• simple access controller for card readers with Wiegand interface
• sauna controller
• energy counter/usage reporting