|
The Avenview HDM-C6VWIP-SET,
Videowall Matrix IP Extender
with Audio, IR RS232 and KVM function provides extension of high definition
video and high quality audio. This device can be used into any solution with its
unique design allowing connection by the following:-
Point to
Point (Direct Connection with CAT5/6)- 100m
Point to Multi-
Point with CAT5/6 requires a Managed Network Switch which supports port
based IEEE 802.1Q VLAN, IGMP v2.0 or above protocol. For large application, we
would recommend Dell Networking 5500 series, which use 2 HDMI port or 2 SFP
port to cascade.
Matrix Function –with CAT 5/6 cable without
any signal loss add multiple Sources to multiple RX which links via LAN by
cascading Managed Ethernet switches up to 3 levels, to the Rx connected to the
HD Monitors at different locations on the Network. Transporting Full HD 1080p
video and internally JPEG video compression adapts to available network
bandwidth if needed while retaining vivid picture with 5.1 PCM
audio.
Videowall Function-with CAT 5/6 cable without any
signal loss add multiple Sources to multiple TX and RX to the HD displays to
achieve a Multi Input videowall configuration. The device ensures flexibility
within any videowall design, layout and configuration. Its modular design allows
example 1x2 ,2x2 3x3 up to 8x8. Easily controlled via the Control Software to
manage and setup the bezel, input and configuration of the Videowall. Optional
IP control box to send commands via a third party automation system through
Telnet commands for simple presentation on the HD diplays.
The IR function on
the TX / RX can be used send remotely IR commands to control the HDMI source
device from any receiver location. The RS-232 on this device is designed to pass
RS-232 signal to any compatible DB9 port to receive commands from the third
party control sytem.
Support USB 2.0, USB signal will be passed through with the CATx signal to
control any peripheral device connected at the TX example a PC 100 meters away
from the display can be controlled with a keyboard and mouse at the display
side. The user can also connect a USB printer to the RX to print at the
location.
IP ControlPro Software is compatible with any Windows PC the user
can set DHCP/STATIC IP addresses, change the names of the TX and RX for easy ID
and also the user can save the desired layout for future use.
|
