| The combined strobe light and siren can add eye-catching audio
visual alarms to the sensorProbe. When triggered, the siren will generate a loud
alarm sound and the strobe light will flash brightly, giving a clear alert of an
alarm condition.
The siren and alarm are both incorporated into one device - only one RJ-45
jack is needed for each combined siren/alarm. Up to 2 devices can be plugged
into RJ-45 jacks on the sensorProbe2 and 8 devices on the sensorProbe8. Each
device comes with a free CAT 5 cable 5 feet in length. You can connect the siren
/ strobe light using your own CAT 5 cable up to 1000 feet, allowing the sensors
to be positioned in hot spots.
When a combined siren / strobe light is plugged into the RJ-45 port, the
sensorProbe will auto detect the sensor, and it will display the status of the
device.
The siren / strobe light can be triggered manually, via the web interface, or
it can be configured to turn on at certain times, through the web interface. The
device can be triggered by any sensor connected to a sensorProbe, or by an alarm
condition generated by the sensorProbe, and can be fully integrated with the
sensor notification matrix on our Linux based systems.
Each device has its own SNMP OID so that status can be collected over the
network and graphed using external application like MRTG. | 
