|
The Sensor Controlled Relay can control the electrical power to devices
managed over the Internet. With easy configuration and integration with the
sensorProbe product series. The Sensor Controlled Relay defines a new era in
energy management.
The Sensor Controlled Relay is easily controlled by any of AKCP's extensive
selection of sensors. The relay can provide automatic responses to sensor
alerts. This is useful, for example, to switch on the fan when the room
temperature rises beyond the threshold level or to turn on a light when the
motion detector is triggered. Setting up the Sensor Controlled Relay is easy
with its built in autosense feature and user friendly web interface.
The Sensor Controlled Relay can also be controlled via external computers
using the included snmp command line utilities either interactively or
programmatically. In addition the Sensor Controlled Relay can be controlled via
the integrated we interface on the sensorProbe.
The Sensor Controlled Relay provides 1 high-power SPDT 5V relay with the
maximum load up to 15A at 220 VAC. It includes Metal Oxide Varistors (MOVs) and
Snubber circuits to protect the open contacts of the relays from the high
voltage spikes or noise transients. It monitors the power & load and accepts
a control signal which is sent from the sensorProbe.
A simple, point and click web manager can set link the Sensor Controlled
Relay to a sensor. When the sensor goes to the chosen state, for example, High
Critical, the Relay can be made to Cycle, which will turn on and then turn off
the external device for the selected period of time. In this case, when the
sensor goes High Critical, the automatic response system will Cycle the relay
for 20 seconds. Users can easily change the fields in the Relay Settings Menu
according to their needs using the dropdown list boxes.
The Sensor Controlled Relay with the automatic response feature can give the
users more flexibility in responding to the environmental alerts. Automatic
response eliminates the need for the user intervention during the alarm
condition.
The Sensor Controlled Relay has built in 16Amp circuit breaker and 15Amp fuse
(380 VAC, 125 VDC) to give the double protection for the external devices from
possible damages by electrical fault.
Status of The Sensor Controlled Relay is reported by 4 LEDs on the board.
Remote monitoring of the status is available using SNMP traps, web interface,
e-mail and SMS.
Note: There are two versions of the sensor controlled relay, 110V
input for USA supply voltages, and 220V for EU supply voltages. If you are
unsure about which product to order, | 
