NetFlow
     
shop이용안내 mypoint 장바구니 배송조회 네트웍강좌 자료실 Q&A 회사소개
  today :14 total :117960
 		  공동구매 Search:    검색   상세검색 클릭!  
제목 없음

 

netflow
무선랜&안테나
AKCP 센서모니터링장비 및 센서
전송 system for Audio-Video
원격제어(Power,Relay)및 IP인터콤&방송
Digital Signage/화상회의/무선마을방송
Aiphone 인터폰
화재감지카메라 및 보안솔루션
네트웍 Extender & Sensors
Lucent
Air station
Panasonic
  현재위치 : HOME >> 네트웍 Sensors 

일반
확대이미지 보기
Power Monitor 센서
  판매가격 원
  제조사 akcp
  생산국 usa
  배송기간 결제 확인후 3 ~ 5 일
  수량
수량 하나 증가
수량 하나 감소
관심상품 찜해놓기 친구에게 상품추천 장바구니에 담기
    Power Monitor Sensor
    The ability to remotely monitor power provides savings in both man hours and downtime. Remote monitoring capabilities eliminate the need for manual power audits as well as provide immediate alerts to potential problems. The Power Monitor Sensor is specifically designed to be used with AKCP’s Linux products including the latest line of securityProbe units. Combining the Power Monitor Sensor and securityProbe creates a fully IP enabled power monitoring product. As with all other AKCP intelligent sensors it is “plug and play” with the securityProbe unit automatically detecting the sensor type and configuring the web interface accordingly. Users can be alerted on the sensor exceeding a pre-defined threshold with AKCP’s industry leading notification options like: SNMP traps, email, SMS, MMS and the recently released Skype support.

    Data collected over time using the Power Monitor Sensor can also be viewed using the securityProbe’s built in graphing tool and can be exported to external applications for analysis.

    The Power Monitor Sensor is a multifunctional power meter capable of measuring RMS voltage and RMS current and energy usage in Watts on a single phase power line. The sensor can work with either 110V or 220V supply voltages. On 220V it can measure RMS voltage between 200 to 260 Volts and RMS current between 0 to 30A. On 110V it can measure RMS voltage between 95 to 125 Volts and an RMS current between 0 to 30A. The resolution of the power sensor is 0.1A for measurements of RMS current and 1V for RMS voltage. The energy meters can measure active energy usage in Watts and Watt-Hour.

     
       
      Specifications & Features:
      Supply Voltage: 110V or 220V
      Measurements:
         - RMS Voltage on 220V: 200 to 260 VRMS
       - RMS Current on 220V: 0 to 30A
       - RMS Voltage on 110V: 95 to 125 VRMS
       - RMS Current on 110V: 0 to 30A
       - Active and apparent power (Watt and Watt-Hour)

      Resolution: 0.1A for measurement of RMS current and 1V for measure RMS voltage.
      Communications cable: UTP CAT 5 wire.
      Measurement rate: one reading every second.
      Up to 8 power monitor sensors per securityProbe
      Full autosense including disconnect alarm
      Power source: sensor powered by measured power point
      Power Consumption: Typical 91.10 mWatt, 18.22mA
      Dimensions: 195 x 145 x 100mm
       
      The sensor comes standard with:
      a CAT5 cable 5 feet in length. This cable can be extended to up to 100ft maximum.
      3ft power in- and output cable rated at a maximum current of 10A*
     
    *For use with currents above 10A (up to 30A) higher rated wiring and plugs are required to be fitted by a certified electrician.

     
    상품상세보기 화면 하단의 배송정보부분에 출력될 메시지. 배송정보와 함께 반품·환불규정등을 간단하게 소개하는 것이 좋습니다.
  • 일부제품의 경우 신모델 출시, 부품가격 변동 등 제조사 사정에 의해 가격이 변동될 수 있습니다.
    이 경우에는 가격보상이 불가하오니 이점 양해해 주시기 바랍니다.
  • 제품 자체의 이상인 경우 100% 반품/환불/교환해 드립니다.
  • 제품 박스 개봉후에는 반품/환불이 되지 않습니다.

클릭하시면 이니시스 결제시스템의 유효성을 확인하실 수 있습니다.
넷플로우(Netflow) 대표이사 : 김 정 운  | 사업자등록번호 : 220-02-59623 통신판매업신고번호 제 06825호
서울시 서초구 방배로 27길 68 202호 | 고객센터 02- 3486-9646  FAX 02-3486-9792
Copyright ⓒ2000-2002 넷플로우(Netflow) Co.Ltd All rights reserved.
넷플로우는 공정거래위원회 고시 제2000-1호에 의거, 공정거래위원회 에서 인증한 표준약관을 사용합니다.