|
PERFORMANCE AND
SCALABILITY |
|
Best-in-class performance with WORP |
By eliminating in-the-air collisions and
maximizing data content for each transmission, WORP (Wireless Outdoor Router
Protocol) significantly improves performance |
|
Near line of sight capable |
Line of sight and near line of sight
connectivity extends deployment flexibility in rural as well as high-density
urban areas |
|
Highest performance per cell |
Supports 6 sectors per cell with an aggregate
data rate of 324 Mbps |
|
Dense subscriber support per cell |
Supports up to 1,500 subscribers with 6
sectors |
|
Guaranteed data rate while roamingRITY |
Allows bandwidth-intensive applications, such as high-definition video
streaming, in mobile environments |
|
QUALITY OF SERVICE
(QoS) |
|
WiMAX 802.16 QoS |
Supports up to 8 QoS Classes; Supports up to 4
Service Flows per class |
|
Trafic Prioritization Parameters Supported |
IP ToS (Layer 3 QoS identification), IP
Protocol List, 802.1p tag (Layer 2 QoS identification), Source IP Address +
Mask, Destination IP Address + Mask, Source TCP/UDP port ranges, Destination
TCP/UDP port ranges, Source MAC addresses, Destination MAC address, VLAN ID,
Ethernet type |
|
Committed information rate (CIR) |
Users can set CIR for each Subscriber
Unit |
|
Minimum Information Rate (MIR) Support |
Settable MIR |
|
SECURITY |
|
Unicast, multicast and broadcast storm
control |
User definable threshold levels prevent
excessive bandwidth consumptions from degrading network performance |
|
Packet filtering |
MAC, Ethertype, IP address filtering provides
very granular networks security |
|
Intracell blocking |
Allows the BSU to act as the central policy
enforcer for SU to SU communications, further enhancing subscriber units’
privacy |
|
WORP as a secure protocol |
Unsnooopable by wireless decryptors, WORP is
preferred for security and surveillance deployments |
|
802.1x authentication |
Supports include PEAP, EAP-TLS, EAP-TTLS
EAP-SIM, and EAP-MD5 to yield mutual authentication and dynamic, per-user,
per-session encryption keys |
|
Secure encryption technology |
Supports for WEP, WEP+ and AES with TKIP
encryption enhancements including key hashing (per-packet keying), message
integrity check (MIC) and broadcast key rotation via WPA TKIP |
|
Interference mitigation tool |
Variable Receive Threshold, Transmit Power
Control, 20 non-overlapping channels and Dynamic
Frequency
Selection |
|
LOWER COST OF
OWNERSHIP |
|
Dynamic Data Rate Selection (DDRS) |
Automatically optimizes throughput as link
conditions change or as subscribers roam. Connectivity
is automatically
maintained when link quality degrades |
|
Flexible and secure remote management |
Supports remote management via Telnet, SNMP and
web interfaces with password protections |
|
Antenna alignment tool |
Audible tone and CLI with running statistics
displaying real-time signal strength ease antenna
system
installation |
|
Comprehensive station statistics |
Unit and group statistics are available for
monitoring, planning and management of a wireless network |
|
Lower recurring lease cost |
Co-locating unit on rooftops with plenty of
available space, lowers lease cost |
|
Options for subscriber units with type-N or
integrated antenna |
Subscriber unit with type-N connector supports
a broad selection of standard-based external antennas and subscriber unit with
integrated antennas supports dual polarizations, vertical and horizontal,
to
minimize installation time |
|
Extreme Operating Temperature |
Rated for –33є to 60є Celcius, 5054-R can be
deployed in hot or cold outdoor climates |
|
Fast boot-up in cold climate |
Sophisticated heating technology automatically
heats the system to shorten boot-up time |
|
Remote Reboot |
System reboot or reset to factory default can
be performed remotely via a power injector button |
|
INTERFACES |
|
Wired Ethernet |
10/100Base-TX Ethernet (RJ-45) |
|
Wireless Protocol |
WORP |
|
Antenna Connector |
Standard-N male (only for BSU and SU with
Type-N connector) |
|
RADIO AND TRANSMISSION
SPECIFICATIONS |
|
Modulation Method |
OFDM |
|
Unlicensed Frequencies |
Americas (FCC): 5.25 to 5.35 GHz (3 channels);
5.725 to 5.850 GHz (5 channels)
Europe (ETSI): 5.47 to 5.725 GHz (11 channels) |
|
Licensed Frequency |
UK: 5.725 - 5.850 GHz (4 channels) |
|
Data Rate |
6, 9, 12, 18, 24, 36, 48, 54 Mbps |
|
UNIT PHYSICAL
SPECIFICATIONS |
|
Dimension |
|
Packaged : |
14.57 x 13.70 x 8.19 in (370 x 348 x 208
mm) |
|
Unpackaged: (BSUR and SUA) |
10.5 x 10.5 x 3.25 in (267 x 267 x 83
mm) |
|
Unpackaged (SUR): |
12.60 x 12.60 x 3.50 in (320 x 320 x 89
mm) |
|
Weight |
|
Packaged (BSUR and SUA): |
9.2 lbs (4.2 kg) |
|
Unpackaged weight (BSUR and SUA): |
5.5 lbs (2.49 kg) |
|
Packaged weight (SUR): |
10.1 lbs (4.6 kg) |
|
Unpackaged weight (SUR): |
6.0 lbs (2.72 kg) |
|
ENVIRONMENTAL
SPECIFICATIONS |
|
Temperature |
|
Operating: |
-33도 to 60도C |
|
Storage: |
-55도 to 80도C |
|
Humidity |
|
Operating: |
Max 95% relative humidity
(non-condensing) |
|
Storage: |
Max 95% relative humidity
(non-condensing) |
|
Water and Dust Proof |
IP65 |
|
ELECTRICAL |
|
Power Injector |
|
Input: |
42 to 60 VDC |
|
Output: |
48 VDC |
|
Power Consumption: |
Maximum 20 Watt |
|
MANAGEMENT |
|
Local Management |
RS-232 serial (RJ11 and DB-9) |
|
Remote Management |
Telnet, Web GUI, TFTP |
|
SNMP |
SNMPv1/v2; MIB-II ; Ethernet-like
MIB;Bridge
MIB; 802.3MAU; 802.11 MIB; Private MIB; Orinoco MIB; RFC 1157; RFC
1213; RFC 1643; RFC 1493; RFC 2668 |
|
MTBF |
100,000 hours; |
|
PACKAGE
CONTENTS |
|
Tsunami MP.11 Model 5054-R Base Station or
Subscriber Unit, wall/ pole mounting bracket, power injector for5054-R, country
specific power cord, Ethernet cable weather-proof plug, Documentation and
Software CD-ROM |
